Reciprocating Air
Compressors Ahmedabad is a positive displacement machine that reduces the
amount of air to increase pressure. The pressure air is stored in a large steel
vessel and is discharged at the point of use through a steel pipe attached to a
control valve.
Because the pressurized air has many uses in the modern
industry, therefore mutual demand is quite large. Their booming construction
and ability to work long-term non-stop makes them industrious.
There are two types of reciprocal Air Compressors
Single Stage Air Compressor
A single-stage Air Compressor Manufacturers In India has
one, two or three compression cylinders of the same bore size, in which piston
(s) compresses the air against the cylinder head to increase its pressure and
discharge it in the storage tank. Typically this type of compressor is used,
where medium pressure air is required, such as pneumatic tools, spray painting,
fuel atomization for boilers, blow molding in chemical industry, filtration
process, and pneumatic nailers, staplers And other similar types of machines.
Two Stage Air Compressors
The air is compressed twice before being sent to the air
receiver tank in two phases. Atmospheric air is filtered and sucked into a low
pressure (LP) cylinder through an inlet valve. The rotating movement of the piston
in the cylinder compresses the air to increase its pressure. Since compression
increases the air temperature, it is passed through an inter locker (heat
exchanger) where the water absorbs heat from the compressed air so that it is
sent in high pressure (HP) cylinder for further compression. This is done to
reduce air temperature and increase the efficiency of the entire compression
cycle. The bore of high-pressure cylinder is less than the LP cylinder and it
helps to increase the design pressure, without the power of the compression
stroke.
There are two types of reciprocal air compressors based on their design. They are:
• Piston water cooled compressor opposing rotating
horizontal balance occurs - in such compressor, both cylinders, LP and HP are
placed in horizontal position opposite each other and operated by a single
crankshaft driven by an electric motor is.
• Water-cooled compressor opposing rotating vertical balance
- this is also the twin cylinder compressor, which is placed in the vertical
direction of HP and LP cylinders, unlike each.
In order to minimize the vibratory forces arising due to the
movement of twin’s piston in interconnection, conflicting compressors need a
strong foundation made from reinforced concrete.
This type of Air Compressors Ahmedabad is far from
strong construction and makes it easy for the operators to run the oil-bearing
parts with minimal power consumption at minimum power and with a low
maintenance brake.
These types of compressors produce pressure up to 17.5 kg /
cm2 and more compression stages can be added to promote the final pressure
according to individual needs. BOP compressors are various industrial sectors
such as chemicals, forging, fertilizer, railway worship, refinery, power plant,
shipyard etc.
There are many types of industrial available in the market
under different brand names. However, before buying any compressor, it should
be ensured that the Air Compressor Manufacturers In India has
included all the security features during the manufacturing process because the
compressor works on high pressure and due to any structural failure, there will
be a major accident at the work site May be.
Comments
Post a Comment